Sectioning Machines
| Hot Compression Machines
|Grinding/Polishing
machines| Belt
Grinders | Automatic Grinding/Polishing Machines |
Spectrometry
Polishing |
In-situ metallography kit |
Consumables
|
Other Products |
|
Automatic tubes / bar / pipes cutting machine
- Automatic heavy
duty abrasive cutting machine for mass production
- Cutting cap. -
Up to 80 mm dia. ( through hardened 42 HRc )
- Automatic feed for
cutting
- Digital Cut length setting
- Material handling
for extra long sections.
- Cutting motion- Cutting wheel swings down
on the job
(Chop type ) - Clamping - Automatic, T slotted bed
clamping, fixed vice
- Pulsating ( setable ) cutting
|
|
|
Jominy End Quench Hardenability Set Up
As per SAE J406 May 85 and BS Std. 4437 - 1969 MT
- JEQF - Special Furnace with DTC, Thyristor
controlled
panel avoids temp. overshooting.
- At a time three Jominy tests can be
carried out. - Quick transfer of specimen to quenching fixture within
specific time with the special tong.
- Quenching Fixture designed strictly
as per BS / SAE with specifications like 45 degree angle of top plate, quenching distance,
jet stopper release just before quenching etc.
- Motorised Water Circulation
with storage & test tank
|
|
|
Muffle Furnace
MTI-1200
- Chamber- 6 x 6 x 12 Inch.Ceramic Lined.
- Max.Temp.12000c, 3 KW,
Heating Element- Kanthal A1 (15 swg).
- Control Panel - Digital controller,
Ammeter, Contactor etc.
|
|
|
Erichson Cupping Tester
Meta-Erich
- I - Direct depth indication on the dial gauge.
- Resolution
of 0.1mm.
- Capacity: 2mm. thick sheet of ferrous & 2.8 mm. thick
sheet of non-ferrous material.
|
|
|
Palletizing Press
- Palletizing press for generating powder
compacts
- Pallet size- upto 1 inch
- Pressure - 10 Tons
- Operation - Automatic
- Loading - By automatic hydraulic Power Pack
|
|